• Wireless and addressable smoke detector, no wiring is needed
• 3V Lithuim battery, over 3-year battery life
• Working with wireless alarm panel,
• notify owner or call CMS when alarm is triggered.
• Complies with EN14604 and UL217 standard
• Vds and UL approved
• Compatiable with LS-10, LS-20, LS-30 panel
• Optional Smoke + Heat Detector
• CE, FCC, RoHS

• Manufactured to BS EN3
• Kite-marked to KM53836
• CE marked to CE1266
• 5 year manufacturer’s warranty
• Supplied with wall mounting bracket
• Suitable on Class A, B, C & electrical fires
• Corrosion resistant finish
• Protective plastic base

Features,

AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2. It is modularized design, the panel can extend from 1 zone to 32 zones easily.
3. It has 2 level control mode by a lock
4. It has 24VDC and 5VDC power supply output.
5. It has FIRE and FAULT signal output.
6. It has 2 general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. It has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.

Features

• Plain annealed copper conductor Cl.1, to BS EN 60288.
• Insulation of high performance Silicone rubber.
• EI 2 to BS 7655 Section 1.1.
• Core colours:
• 2 Core : blue, brown.
• 3 Core : blue, brown, black.
• 4 Core : blue, brown, black, grey.
• Earth/Drain wire of annealed tinned copper Cl.1 to BS EN 60228.
• Electrostatic screen of aluminium fire barrier with 125 % overlap.
• Sheath Type LTS3 to BS 7655 section 6.1.