2 Zone Fire Alarm Control Panel AW-CFP2166-2 Asenware
Rated 0 out of 5
(0)
Highlights:
Features,
AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2. It is modularized design, the panel can extend from 1 zone to 32 zones easily.
3. It has 2 level control mode by a lock
4. It has 24VDC and 5VDC power supply output.
5. It has FIRE and FAULT signal output.
6. It has 2 general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. It has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
CO2 Fire Extinguisher 9 Litres
Rated 0 out of 5
(0)
Highlights:
- Manufactured to BS EN3
- Kite-marked to KM53836
- CE marked to CE1266
- 5 year manufacturer’s warranty
- Supplied with wall mounting bracket
- Suitable on Class A, B, C & electrical fires
- Corrosion resistant finish
- Protective plastic base
Fire alarm bell with strobe light for Alarm Sound System
Rated 0 out of 5
(0)
Highlights:
| Parameters | |
| Working voltage | 11-27VDC |
| Working current | 40-60mA |
| Flash period | 90times/min |
| Temperature range | -10to+50 |
| Humidity range | 0-95%RH |
| Sound pressure level | 100dB |
| Type of sound alarm | 3kinds |
| Size | 134*115*48mm |
Fire Alarm Panels
Rated 0 out of 5
(0)
Highlights:
Features,
Alarm reset available from a front panel key-switch
Trial Evacuation key-switch
Fire & Defect C/O relays with Fire relay Isolate switch
Automatic Alarm Verification Facility (AVF) provides substantial
protection against transient false alarm activation
Supervised bell circuit with 10 kΩ EOL resistor
Maximum of two 20 Watt 100 Vrms line amplifiers with voice
evacuation message
‘Battery Absent’ detection circuitry
Earth leakage supervision
Integrated Alarm and Defect piezo for audible warning
On-board System ‘Defect’ LED indicates source of fault
Door Interlock
Brigade ‘Isolate’ and ‘Test’ switches
Electrically isolated interface to an alarm transmitter (SGD)
DBA mode ‘Non Latching, Bell Only’ configuration available (on Circuit 4)
Automatic daily load test with automatic ‘Battery Absent’ detection circuitry
Fire Blanket 1.8m x 1.8m
Rated 0 out of 5
(0)
Highlights:
Features,
- Hard Durable Case.
- 1.8m x 1.8m Fire Blanket.
- Easy to Install & Maintain.
- Flush end caps for easy cleaning.
- Hinged cap with security seal option avoids blankets being tampered with.
- Blanket complies with BS EN 1869:1997 and are BSI kitemarked.
Fire Resistance Cable
Rated 0 out of 5
(0)
Highlights:
Features
- Plain annealed copper conductor Cl.1, to BS EN 60288.
- Insulation of high performance Silicone rubber.
- EI 2 to BS 7655 Section 1.1.
- Core colours:
- 2 Core : blue, brown.
- 3 Core : blue, brown, black.
- 4 Core : blue, brown, black, grey.
- Earth/Drain wire of annealed tinned copper Cl.1 to BS EN 60228.
- Electrostatic screen of aluminium fire barrier with 125 % overlap.
- Sheath Type LTS3 to BS 7655 section 6.1.
FP200 Gold Prysmian 1.5mm² Fire Resistant Alarm Cable
Rated 0 out of 5
(0)
Highlights:
Features,
- Standard fire resistant cable as defined by British Standards
- Tough, durable and dressable essential systems cable
- Easy to install and terminate
- Excellent data and signal transmission characteristics
- Ideal for surface, tray, direct burial in plaster
- Rigid
- Halgen Free and Low Smoke
- Low smoke
Manual Fire Alarm Break Glass
Rated 0 out of 5
(0)
Highlights:
Features,
- Operating Voltage: DC 12-24V
- Operating Current: 2A
- Withstood Voltage: AC 250V
- One way / two way (single pole/double pole)
- Transparent cover optional
- Color Available: red, green, yellow, blue, white
- Weight: 155g
- Dimension: 86*86*52mm
Red Fire Alarm Bell best price
Rated 0 out of 5
(0)
Highlights:
- Sleek low profile appearance
- Low current consumption
- Ideal for use of various applications for example fire alert or to signal class change
- Comes complete with an Allen key for easy installation and a tamper resistant hex bolt
Smoke Detector
Rated 0 out of 5
(0)
Highlights:
- Wireless and addressable smoke detector, no wiring is needed
- 3V Lithuim battery, over 3-year battery life
- Working with wireless alarm panel,
- notify owner or call CMS when alarm is triggered.
- Complies with EN14604 and UL217 standard
- Vds and UL approved
- Compatiable with LS-10, LS-20, LS-30 panel
- Optional Smoke + Heat Detector
- CE, FCC, RoHS