Cisco Catalyst 9200 Series 24 Port POE Switch

The following are features cisco catalysts 9200 series 24 port poe switch:

Device Type: Switch – 24 ports – managed
Enclosure Type: Rack-mountable – 1U
Ports: 24 x 10/100/1000 (PoE+) + 4 x 1 Gigabit SFP
Power Over Ethernet (PoE): PoE+ (IEEE 802.3at)
PoE Budget: 370 Watts
Performance:
Switching capacity: 88 Gbps
Forwarding performance (64-byte packet size): 130.95 Mpps
MAC Address Table Size: 32,000 entries
Routing Protocol: RIP-1, RIP-2, HSRP, VRRP, OSPFv2, EIGRP, static IP routing, policy-based routing (PBR)
Jumbo Frame Support: 9198 bytes
Remote Management Protocol: SNMP 1, SNMP 2, SNMP 3, RMON, Telnet, HTTP, HTTPS, TFTP, SSH, CLI
Features:
Layer 2 switching
Layer 3 switching
VLAN support
Quality of Service (QoS)
Auto-negotiation
Auto-uplink (auto MDI/MDI-X)
IGMP snooping
Broadcast Storm Control
DHCP snooping
Access Control List (ACL) support
Port Security
IPv6 support
Power Over Ethernet (PoE):
PoE budget: 370 W
Max. PoE power per port: 30 W (IEEE 802.3at)
Power: AC 120/230 V (50/60 Hz)
Dimensions (WxDxH): 44 cm x 31.2 cm x 4.45 cm
Weight: 5.35 kg
Environmental Parameters:
Min Operating Temperature: -5°C
Max Operating Temperature: 45°C
Humidity Range Operating: 5 – 90% (non-condensing)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3at, IEEE 802.3az