DYMO Label Tape 45013 (12mm 7m Black on White)
The following are features of Dymo label tape 45013 12mm 7m black on white
Color black
Size Small
Brand Name DYMO
Item Shape Round
Manufacturer Dymo-CoStar Corp
KSh 2,600.00 KSh 1,500.00
Dymo
Cartridge Series
D1 Label Tape
Consumable Type
Label tape
Descriptive Colour
Black and white
Label Colour
White
Label Text/Print Colour
Black
Label Type
Direct thermal printing
Printing Technology
Thermal transfer
Roll Length (m)
7
Self-Adhesive
N/A
Tape Width (mm)
9 mm
Technology
Thermal transfer
Compatibility
Compatible Printers
DYMO LabelWriter
The following are features of Dymo label tape 45013 12mm 7m black on white
Color black
Size Small
Brand Name DYMO
Item Shape Round
Manufacturer Dymo-CoStar Corp
Features,
AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2. It is modularized design, the panel can extend from 1 zone to 32 zones easily.
3. It has 2 level control mode by a lock
4. It has 24VDC and 5VDC power supply output.
5. It has FIRE and FAULT signal output.
6. It has 2 general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. It has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
Features,
Hand Held Metal Detector Garrett V is designed in a way that, one places his hand around the plastic hence the person using it will have a firm grip of the metal detector this metal detector is soft, hence it does not cause blisters. it is manufactured using a durable material
Features,
Alarm reset available from a front panel key-switch
Trial Evacuation key-switch
Fire & Defect C/O relays with Fire relay Isolate switch
Automatic Alarm Verification Facility (AVF) provides substantial
protection against transient false alarm activation
Supervised bell circuit with 10 kΩ EOL resistor
Maximum of two 20 Watt 100 Vrms line amplifiers with voice
evacuation message
‘Battery Absent’ detection circuitry
Earth leakage supervision
Integrated Alarm and Defect piezo for audible warning
On-board System ‘Defect’ LED indicates source of fault
Door Interlock
Brigade ‘Isolate’ and ‘Test’ switches
Electrically isolated interface to an alarm transmitter (SGD)
DBA mode ‘Non Latching, Bell Only’ configuration available (on Circuit 4)
Automatic daily load test with automatic ‘Battery Absent’ detection circuitry
Parameters | |
Working voltage | 11-27VDC |
Working current | 40-60mA |
Flash period | 90times/min |
Temperature range | -10to+50 |
Humidity range | 0-95%RH |
Sound pressure level | 100dB |
Type of sound alarm | 3kinds |
Size | 134*115*48mm |
Features,
Features,
Features,
Razor Wire Flat Wrap Coils-Flat Security
Specifications:
Inside wire: 2.50 mm (-0.00, +0.10 mm).
Tensile strength: 160 kg/mm2 (min).
Zinc plate: 200 g/m2 (min) hot dipped galvanized.
Outside sheet: 0.50 mm (-0.00, +0.10 mm) hot dipped, bright, shining.
Flat wrap razor wire.
Height: 90 cm. Weight: 1 kg/m (min).
Coil length: 16 m coils.
Coil weight: 16 kg.
Packing: each coil wrapped with paper and hessian cloth.
Coil diameter: 45 cm.
Coil type: cross type.
Loops per coil: 56.
Clips per coil: 3 tie clips.
Coil weight: 7 kg.
Packing: each coil wrapped with paper and hessian cloth.
Ideal stretching length: 6-7 m.
Max stretching length: 8.5-9.5 m.
Get access to your Orders, Wishlist and Recommendations.
Shopping cart is empty!
Reviews
There are no reviews yet.